STANDARD WELDING/BRAZING TIPS
It can be selected the optimum welding /brazing tips which are correspond to Gas kinds , Torch specification and the heating works from our various products.
 
00 welding tip Product number SA100
Available gas Acetylene + Oxygen
Fit Screw pitch size M6×1.0
Application capacity range #50 - 500　　　→Reference
Overall length（mm） 28
Material BsBM
Flame length is short so it is very easy to treat. This tips are standard type one for a hand torch and automatic brazing machines widely.
00 long size tip Product number SA102
Available gas Acetylene + Oxygen
Fit Screw pitch size M6×1.0　　　→Reference
Application capacity range #50 - 500
Overall length（mm） 49
Material BsBM
Tip length is longer than 00 welding tip , so a sharp flame is obtained easily.
And since no influence of a return flame, its life time is longer and therefore you can save much running cost .
Small-size welding tip Product number SA200
Available gas Acetylene + Oxygen
Fit Screw pitch size M8×1.0
Application capacity range #50 - 500　　　→Referenve
Overall length（mm） 36
Material BsBM
it is a standard type tip with a screw pitch size M8x1.0 .And it is used for a hand torch and automatic brazing machines as well as 00 welding tips.
Medium-size welding tip Product number SA210
Available gas Acetylene + oxygen
Fit Screw pitch size M8×1.0
Application capacity range #50 - 630　　　→Reference
Overall length（mm） 40
Material Cu
A long life time can be realized by using copper materials .
It has a wide application capacity range even at a high temperature and high power application.
00 3 slit tip Product number SA104
Available gas LPG,LNG + Oxygen
Fit Screw pitch size M6×1.0
Application capacity range #50 - 450　　　→Reference
Overall length（mm） 28
Material BsBM
It is a standard tip for LP gas and 13A .
Since a burning rate is slower than acetylene gas generally , LP gas and 13A gas often causes to lose flame. This tip easily prevents these trouble by the auxiliary flame from slit parts in own configuration .
00 jyanome tip Product number SA105
Available gas LPG,LNG + Oxygen
Fit Screw pitch size M6×1.0
Application capacity range #50 - 630　　　→Reference
Overall length（mm） 35
Material BsBM
This is the most ideal tips for LP gas + Oxygen operation .
The auxiliary flame that locates as the shape of circle on the top surface of tip suppresses the variation of the main flame and creates a sharp flame .
Moreover the capacity is also large and it realizes a good stability without losing flame even at a high temperature and high power output operation .
00 SP tip
 		Product number SA107
Available gas LPG,LNG + Oxygen
Fit Screw pitch size M6×1.0
Application capacity range #50 - 630　　　→Reference
Overall length（mm） 29
Material BsBM + Cu
It creates a soft and thick flame.
and copper materials are used at outside of tip for adapting a high temperature and a high power output operation.
It is suitable for especially 13A gas.
Medium-size SP tip Product number SA220
Available gas LPG,LNG + Oxygen
Fit Screw pitch size M8×1.0
Application capacity range #50 - 630　　　→Reference
Overall length（mm） 40
Material BsBM + Cu
This has the same specification as 00 SP tips with a screw pitch M8x1.0 .
And it can be obtained more rich flame because of  larger tip diameter than 00 SP tips.
Moreover it is very hard to lose flame on account that the auxiliary flame spouts out with incasing a main flame.
Slender Q (new model) tip Product number SA231
Available gas LPG,LNG + Oxygen
Fit Screw pitch size M8×1.0
Application capacity range #00 - 5　　　→Reference
Overall length（mm） 45
Material Cu
This tips create a straight power flame.
It is possible to make a straight flame even at a gas flow or high power output output.
It is available for a thick iron board etc. and also especially high temperature heating use.
Slender Q (old model) tip Product number SA232
Available gas LPG,LNG + Oxygen
Fit Screw pitch size M8×1.0
Application capacityrange #00 - 5　　　→Reference
Overall length（mm） 55
Material Cu
This tips create a straight power flame.
It is possible to make a straight flame even at a gas flow or high power output output.
It is available for a thick iron board etc. and also especially high temperature heating use.
6 Slit Tip Product number SA222
Available gas LPG,LNG + Oxygen
Fit Screw pitch size M8×1.0
Overall length（mm） 45
Material BsBM + Cu
It creates rich flame because of no center hole which makes a soft flame and is useful for brazing or soldering, etc.
12 slit tip Product  number SA223
Available gas LPG,LNG + Oxygen
Fit Screw pitch size M8×1.0
Overall length（mm） 44
Material BsBM + Cu
It has the same specification as 6 slit tips and can create more wide range flame.
16 Slit Tip Product number SA224
Available gas LPG,LNG + oxygen
Fit Screw pitch size M8×1.0
Overall length（mm） 45
Material BsBM + Cu
It is suitable for brazing, soldering, etc. which has a big heating area because that it can create more wide flame than above 6 and 12 slit tips.

SPECIAL TIPS

Various kind of special tips are available
LPG(LNG)+AIR TIP The flame is soft and it is the best for brazing and soldering, etc.
Product number SA241
Available gas LPG(LNG)+AIR（Compressor air）　　　　　　　
Fit Screw pitch size M８×１.０
Overall length（mm） ３５
Material ＳＵＳ
Three gas TIP It can be obtained higher calorie flame than propane + air operation but more soft than propane + oxygen operation.
And it is possible to use for the natural gas.
Please use it with three gas mixture torch.
Product number SA250　　(S）
SA251　　(L)
Available gas LPG(LNG)+Oxygen+AIR（Compressor air）
Fit Screw pitch size M８×１.０
Overall length（mm） S：３１　/　L３７
Material ＳＵＳ
Product number SA122
Available gas LPG + Oxygen
Fit Screw pitch size M８×１.０
Application capacity range #630（Dia. 2.0）　×２
Material BsBM + Cu
Direction variable
formula tip		  
Product number SA262
Available gas LPG + Oxygen
Fit Screw pitch size M８×１.０，M６×１.０
Material BsBM
 

CATALOG

HOME

(C) Copyright 1999- S.A.JAPAN INC. All rights reserved.