GAS SAVER |
|
| Hanging torch on a lever it is stopped to feed of Oxygen and Gas immediately, and it can be simply ignited by a spark rod at the time of activity resumption. |
| SE Saver II (New Advanced type ) | ||
|
|
External size | v115×c115×g440 |
| Weight | Approx. 4kg | |
| Supply voltage | AC220V | |
| Ignition control | Micro processor control | |
| ignition method | Ignitor spark | |
| Gas control | Solenoid valve | |
| Connecting method | Hose joint | |
| Flame detection | Flame rod | |
| Available gas | Oxygen and Acetylene Oxygen and LP gas Oxygen and Sharp gas |
|
| Product number | Specification |
| SEII | Acetylene , LPG / Oxygen |
| SE-N2 | Additional N2 gas control unit |
It is possible to ignite certainly and easily
with NO flame of the pilot nozzle.
After igniting the torch, the pilot frame
is extinguished automatically.
It results saving energy comparing
with old type saver.
With the use of the solenoid valve, ONEOFF
of the gas
it is excellent in work and safety because
it is accurate.
Moreover, even if the torch is
coming off from the lever by any accident
a gas flame is stopped automatically.
@Related commodityFValve-less torch
| Diaphragm type Standard Gas Saver | ||
 |
Size | |
| Weight of product | Approx. 2.5 kg | |
| Available gas | Oxygen and acetylene Oxygen and LP gas Oxygen and Sharp gas |
|
| Because of
the mechanical
valve the power supply is unnecessary.
Pilot nozzle is not included. |
||
| Product number | Specification |
| SS703-A | For Acetylene gas |
| SS703-P | For Propane gas |
| The pilot nozzle must be selected in each gas for different specification. | |
(C) Copyright 1999- S.A.JAPAN INC. All rights reserved.
